Dynamic Gates and stairs FAQ
Payment and Delivery
We do a site inspection and measure, then the product is manufactured and delivered and also installed as requested, and we service and deliver in a 100 KM range of Melbourne’s CBD. In most cases we request 50% of the quote upfront before completion, or in some cases 70% up front,and the deposit form signed, and the full 100% payment upon completion or when delivered, or installed within 7 days . For our returning customers we ask for final payment to be payed in full within 7 Days of completion. Payments can also be made by cheque, or direct bank transfer.
Products,warranty and Installation
(GATE MOTORS AND AUTOMATION) we use are from the highest quality and manufactured from italy. When purchasing online, we have a variety of high quality brands we use, and that are sourced from our suppliers. Gate motors can vary due to what stock is available at the time of purchasing from our manufacturers. Some of the brands we use are T ONE, , Beninca, M House, and SEA brands. Also we advise for gate motors that are installed in a place with high usage for example shared appartments,or carparks, using or choosing a oil lubricated sliding gate motor is highly advised or a motor made for high usage,and for swing gates using hydraulic motors.
(AUTOMATION AND EXTRAS) which include customising your motor which can include a different brand, or a larger motor, Solar Powered accessories, and also photo cells, and keypads. If you would like to purchase any of these additional products, please forward what you would like when ordering, or in a requested quotation.
(POWDER COATING COLOURS) which are included are Standard Colours in the deluxe colour chart. For any other custom colour will be at a additional cost including galvanising.
(STEEL GATES) come with a 2 year structural warranty direct from us. Automation gate motors which are outsourced through our supplier will be notified if a claim is made. The outsourced company will do a site inspection to test for faults for warranty to be claimed. It is up to the outsourced companies technician decision, to replace or repair under warranty,and a call out charge is charged to any person claiming warranty for their gate motor or product. One of the main problems can be power surges or bad power which can effect gate motors and do damage. We also highly recommend power surge protectors to be installed to gate motors when installed by us. This can be purchased and installed for a additional cost. If a power surge has been detected by a technician, warranty will not be covered.
(STAIRCASES) are only made to order, and design, and be fabricated, and delivered onsite, and also can be installed. We charge a minimum of $800 for installation for easy access with a crane.If there is not easy access you might be charged extra accordingly if need be a larger crane. INSTALLATION WILL ONLY GO AHEAD IF THERE IS NO ROOF ABOVE THE VOID AREA WHERE THE STAIRCASE IS BEING FITTED, TO GANE CRANE ACCESS. Please also advise us of the thickness and width of treads you are using at check out so we can design accordingly.
(FOUNDATIONS) Sliding gates need a concrete foundation for the gate to slide on its track and also to house the motor. The footings are a extra charge where a trench is dug out,reinforcement installed,and concrete poured. Foundations pricing depends on the size of the gate and between $300-$400. Please advise us at check out if you need a concrete footing.
We will not be liable for posts or gates that have been moved, or sagged, or miss aligned, from earth and concrete movements once the gates have been installed.
(Stairs) Stair stringers are made to order and timber treads are not provided. At checkout or when ordering please provide the timber tread size thickness, and width, for the staircase to be made.
( POWER) is needed at the gate entrance on the side that the gate will open to power the motor. Installation of power can be done by us if there is a power point outside of the house or close to where the gate motor is being installed, and we charge per meter to have the power cable layed in conduct from the powerpoint to motor. If there is no power point, the buyer will have to arrange to have a electrician to install a powerpoint or connection to the gate motor or this can be organised by us.
(SOIL & ROCK) that is removed by us for foundations, and post holes, will not be taken away, and left onsite for removal by the owner. There will also be a (additional charge) for rocks that are removed.
Delivery and Installation
If stairs are to be delivered onsite, or if gates will be installed,the buyer will be notified via email or by text prior to the day of delivery or installation. (Dynamic R/C Gates & Stairs will not be responsible or liable for some damages which include little glue marks or small paint marks, or adhesives, and welding splatter left on some surfaces, which include, fences,brick piers, tiles,and concrete, brick walls, glass, flushing and timber. We also will not be responsible or liable for cracking of bricks for example, brick piers,or rendered brick piers, or cracking of concrete due to poor application or workmanship prior to commencement of the job. We also will not be liable for cracking of tiles when drilling.